Articles in this section

See more

Information, Programming Guide and Support for the Code Alarm CATX610 Transmitter

Avatar
CS
Updated
Follow

Information on the Code Alarm CATX610 Transmitter

CATX610


CATX610 Programming Guide

Programming Instructions:

To program new or additional transmitters:

  1. Enter the vehicle, and turn the ignition switch to the ON position.
  2. Press and release the programming button switch 3 times.
  3. The dash mounted LED will flash 1 time, and the horn/siren will sound 1 time, indicating that the system is ready to accept programming of channel 1 which is arm/lock.
  4. Press and hold the lock icon button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the horn/siren. Repeat step 4 for any additional transmitter you wish to program.
  5. Press and release the programming button switch 1 time to advance to channel 2. The dash mounted LED will flash 2 times and the horn/siren will sound 2 times, indicating that the system is ready to accept programming for channel 2 which is disarm/unlock.
  6. Press and hold the unlock icon button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the horn/siren. Repeat step 6 for any additional transmitter you wish to program.
  7. Press and release the programming button switch 1 time to advance to channel 3. The dash mounted LED will flash 3 times and the horn/siren will sound 3 times, indicating that the system is ready to accept programming for channel 3 which is trunk release/remote start.
  8. Press and hold the trunk/key icon button of the transmitter you wish to program for 4 seconds or until a long flash from the parking lights. Repeat step 8 for any additional transmitter you wish to program.
  9. Press and release the programming button switch 1 time to advance to channel 3. The dash mounted LED will flash 4 times and the horn/siren will sound 4 times, indicating that the system is ready to accept programming for channel 4 which is an optional device.
  10. Press and hold the option button of the transmitter you wish to program for 4 seconds or until a long flash from the parking lights. Repeat step 10 for any additional transmitter you wish to program.

Register Your Product

 


STILL NEED HELP?- We use an automated support system so we can serve our customers in a first in - first out manner and prevent long hold times on the telephone systems

FIRST

  • Feel free to search the knowledge base by entering your model number or keyword in the search box on the Support Home Page or on the Answer Page , then push the red search button to find additional answers available as this answer may be only one of the many available answers in our system for your product.

NOTE: Search for a MODEL NUMBER, searching for words like purchase or, warranty will get you far to many results and make finding the answer you are looking much more difficult

REACHING CUSTOMER CARE

If searching the answers in our Knowledgebase did not answer your question and you need additional information, support, warranty service or want to inquire about out of warranty repair please follow one of the steps below to use the automated support system

1. New to the Support Site :
Click here to go to the Support Account Creation Page so you can submit a support request and we can respond.

2 . Returning Customer:
Click Here to Go to the Ask A Question Page so you can submit a support request and we can respond. Note: You may have to login if you haven't already.

 

Comments

0 comments

Article is closed for comments.