|
Operating the Prestige APS901N Remote Start System |
|
| Remote Starting the Vehicle: |
The unit will not start the vehicle if any one of the following situations exists:
To start the vehicle:
|
| Unlocking the Vehicle: |
If you have electric door lock and the optional lock feature was added, with the vehicle running under command of the remote start unit, press and hold the transmitter button for 3 seconds until the doors unlock. |
| PRLED Safety Control Switch: |
The push-button control switch allows you to temporarily disable the remote starting function of the system. To place the system in the service mode:
To exit R/S Override Mode:
|
| Telematic Upgrade: | This system has the ability to have a telematic upgrade module connected to it. This is an upgrade that can give you control of certain functions of your vehicle from a Telephone or in some cases a computer interface. Please check with your installation center for the most recent Telematic Upgrades. If you had a Telematic Upgrade installed, the manual supplied with the upgrade unit will provide an operator's manual advising you of the features of the system and means available to control these features of your vehicle. |
Comments
0 comments
Article is closed for comments.