Operating the Code Alarm CA430 Remote Start Upgrade

Operating the Code Alarm CA430 Remote Start Upgrade

Using the Remote Start Feature

Starting Your Vehicle: The Remote Start Upgrade System can be installed to operate from any unused buttons or combination of buttons on your existing remote control transmitter. Please check with your installing dealer for which button is connected to your remote start system, and if it requires a single, double or sequential press of the button(s) to operate your system.

When activated, the system will check the vehicle to ensure that it is safe to start, and if all safety parameters are correct, the engine will start within 5 seconds (diesel engines will take longer.) Using the remote start activation sequence on your remote control transmitter again will turn off the remote started vehicle. While in Remote Start mode, the vehicle parking lights will remain ON. The vehicle will run for 12 or 25 minutes, depending on run time selected by your installer.

Entering the Vehicle While It is Running via Remote Start:

1. Enter the vehicle. Do not press the brake pedal.
2. Insert the key into the ignition and turn to the ON position.
3. Press the brake pedal. The remote starter disengages and the vehicle will operate normally.

Pre-Heating or Pre-Cooling the Interior of the Vehicle: Before exiting the vehicle, set the vehicle’s temperature controls to the desired setting and operation. After the Code Alarm CA430 starts the vehicle, the heater or air-conditioning will activate and heat or cool the interior to your setting.

Remote Start Safety Features: For safety and security reasons, the Code Alarm CA430 will not allow the vehicle to start if the following conditions are present:

• The vehicle hood is opened
• The brake is pressed and held

For safety and security reasons, the CA430 will terminate remote start run time and shut the vehicle off if the following conditions are present:

• The brake pedal is pressed before the vehicle ignition is turned on with the key
• The engine reaches 3 times its normal idle

As a safety precaution, the vehicle will shut off if left unattended for 12 or 25 minutes, depending on the time preset by your installer.