Operating the Code Alarm ROG1 Keyless Entry Upgrade

Operating the Code Alarm ROG1 Keyless Entry Upgrade

System Functions

Arming the Security System: To arm the system, exit the vehicle, close all doors, then press the LOCK button on your Keyless Entry Remote Control. After 15 seconds parking lights will flash once, indicating the system is armed. The status indicator (red warning light on the dash) will blink steadily, once per second. To force ARMING press LOCK twice on the remote. The unit will arm immediately.

Disarming the Security System: To disarm the system, press the UNLOCK button on your Keyless Entry Remote Control. The siren will chirp and the parking lights will flash once.

Attempted Intrusion Identification: If the horn chirps four times when disarming, this indicates that the system was triggered in your absence. The status indicator will also flash rapidly. Perform the following operation to determine the protected zone that triggered the system: After disarming, press the emergency override button. The siren will chirp to indicate the cause of the alarm trigger: 1 chirp IT-s Interior Theft Sensor. 2 chirps Door. 3 chirps Hood. 4 chirps Trunk/Optional Sensors. 5 chirps Ignition was turned on.

To enter valet mode: With the key, turn the ignition on, then turn off 3 times within 5 seconds.

To exit Valet mode: With the key, turn the ignition on, then turn off 3 times within 5 seconds.

When Your Security System is Triggered: The upgrade security system will trigger if one of the following events occurs while the system is armed:

• Any protected entrance is opened
• The vehicle ignition is turned on
• The vehicle is jolted hard enough to signal the impact detector

Once the alarm is triggered, the siren (or horn) sounds and the vehicle parking lights flash for 30 seconds. The system will then rearm, awaiting the next intrusion attempt. To stop the siren while keeping the alarm armed and doors locked: press the LOCK button (on the Keyless Entry Remote) while the system is triggered.

The Interior Status Indicator: The Status Indicator is a high-intensity red light mounted in a visible location on the vehicle dashboard. This red light gives a visual indication of the alarm system’s state of operation.

Emergency Disarm Procedure: If your remote control is lost or fails to function, use this procedure to disarm the upgrade security system and start your vehicle.

1. Use the keys to enter the vehicle. The alarm will sound once the door is opened.
2. Insert the key into the ignition and turn to the ON position.
3. Locate and press the emergency override button. The alarm will turn off and then you will be able to start your vehicle.

Thank you for your inquiry - Audiovox values our customers and though this product is no longer in production nor does it qualifiy for warranty or repair due to the age of the product, limited support information may be available through our FAQ Database and/or Customer Service.

Before you proceed check this and other answers related to your product by searching with the Model Number of your product from the Search Box above.

NOTE: Technical support, parts, user manuals (not shown on this FAQ), accessories, or repairs are either limited or NOT available for discontinued models.

 

How useful is this answer?