|
Operating the Code Alarm Elite 4000 Alarm System |
|
|
Remote Controlled Functions Remote controlled door lock/unlock, illuminated entry/exit and remote controlled trunk release may require additional parts and labor to hook-up. Because additional parts and labor may be required these features are referred to as optional features and not standard features.
Arming System When There Is An Active Zone: When there is an open door or other sensor trigger present (active zone) when the system enters pre-arm, the system begins a 4-1/2 minute countdown at the end of which, it bypasses the active zone. The siren then emits the second arm chirp indicating the system is armed with the bypassed zone unprotected. If the active zone becomes inactive before the 4-1/2 minute countdown ends, the system will then fully arm with all zones protected. If the bypassed zone turns inactive after the 4-1/2 minute countdown ends, that zone will remain unprotected until the system is disarmed and then rearmed. |
|
|
How the Security System Protects Your Vehicle
When An Alarm Cycle Is Triggered: When a protected zone is violated, the following events occur:
This series of events is called an alarm cycle. The alarm cycle lasts for one minute and then shuts down returning the security system to a fully armed state, except when:
|
|
|
Elite Series Personal Safety Features Auto Functions: In addition to the remote controlled security features, there are two automatic features designed to enhance your personal safety.
|
Comments
0 comments
Article is closed for comments.