Features and Using the Controls of the Advent ADV8SF Monitor with DVD

Features and Using the Controls of the Advent ADV8SF Monitor with DVD 

Features

• 8.5” TFT (Thin Film Transistor) Active Matrix LCD (Liquid Crystal Display) Monitor
• Built-in DVD Player
• OSD (On Screen Display) for Control of Picture Quality and Functions
• Two Audio / Video Source Inputs (DVD, AV1/AUX)
• Dome lights with built-in three way switch
• Built-in 16 Channel Wireless FM Modulator
• Last Position Memory for DVD
• Playing DVD, CD and MP3 discs
• Infrared Transmitter for IR wireless headphones
• AV output via RCA Jacks
• Screen Mode selection (4:3, 16:9)
• Full Function Remote Control
• Backlit Controls

Controls

1. POWER Control -Used to turn the system on/off (standby).

2. Source Select - Used to select one of the two sources: DVD, AV1/AUX

3. PLAY Control - This control is used to start playback of a disc.

4. STOP Control - Press STOP once : Stops playback, Pressing the PLAY button again will resume normal playback from where movie was stopped. - Press STOP twice and then press PLAY to start playback
from the beginning of the DVD.

5. EJECT Control - This control is used for ejecting disc from the disc compartment.

6. Three Position Dome Light Switch
ON - Turns on the dome lights.
OFF - The dome lights will not turn on in this position.
AUTO - Automatically switches on the dome lights in conjunction with the vehicle's interior illumination.

7. Dome Lights - Provide additional interior illumination.

8. Ventilation Openings

9. LCD Cut Off Switch - Used to turn off the LCD backlight when the LCD is in the closed position.

10. LCD Panel

11. Screen Release - Press to release the screen.

TURNING THE UNIT ON OR OFF

1. Pushing in the Screen Release button will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a comfortable viewing angle is reached. The hinge friction will hold the screen in position while the system is in use.
2. Pressing the power button* on the unit or the remote control will turn the system on and off. When in use the internal backlighting will illuminate the controls.
3. After the unit has been turned on and is displaying a picture, adjust the viewing angle, by pivoting the screen to optimize the picture quality.
4. Remember to turn the unit off and pivot the LCD to the locked position when not in use.

Source Feature

AV1
The AV1 input may be connected to a external video source, video game system, or other audio / video devices. To access the audio / video
inputs, inputs, turn the unit on and press the S (source) button or the Source button on the remote control until "AV1/AUX" is displayed on the screen. Turn the video source component on with its power button or remote control and it is now ready to play the audio and video signals from the source connected to AV1.

<span style="FONT-WEIG