Operating the P-MC3 Wired Commander

Operating the P-MC3 Wired Commander

To Begin Operation:

Turn on the changer system by pressing the Play/Pause button on the commander. The display panel on the commander will illuminate and play of the first disc in the magazine will begin.

Adjust the volume, tone, and balance to your taste by using the controls on the car stereo.

When the last track on a disc has played, the unit will automatically advance to and begin play of the next disc in the magazine. When the last track on the last disc in the magazine has been played, the unit will automatically return to the first disc and begin play again.

Operation:

1. LCD DISPLAY: The LCD Display Panel will illuminate when the CD changer is operating. Different symbols will appear depending on the function and operation in use. Each display is explained in the applicable function explanation below.
2. PLAY / PAUSE: Pressing this button turns on the CD changer, illuminates the LCD panel and begins play of disc #1 if a new CD magazine has been loaded into the changer. If a magazine was already in the changer, play will resume from the track on the disc previously in play. Play of the disc is shown by the indication and the rotating disc symbol on the LCD panel. Pressing the button again will temporarily stop play of the disc. The pause indication will be shown on the LCD panel and the disc symbol will stop rotating and flash instead. Press the button again to resume play of the disc. Note: If left in the PAUSE mode for 5 minutes, the unit will automatically shut off.
3. POWER OFF SWITCH (OFF): Press this switch to turn the CD changer off and return to normal FM reception.
4. DISC SELECT: The Disc Select function is used to select the desired disc for play as shown on the LCD panel. The unit will automatically load the selected disc and begin play. To advance to a higher number disc, press the + side of the button. To return to a lower number, press the - side.
5. TRACK SELECT: The Track Select function is used to quickly access the beginning of a particular track. Press Forward Track Select or Backward Track Select to locate the desired track as shown by the track number indication on the LCD panel.
6. TRACK SEARCH: High-speed audible search to any section of the disc can be made by the search functions. Press and hold the button to advance quickly in the forward direction or press and hold the button to advance rapidly in the backward direction. During search operation, the rotating disc symbol will turn faster and the appropriate symbol or will flash on the LCD panel. When the forward search button is held down and the end of the last track is reached, or the backward search is held down and the unit reaches the beginning of the first track on the disc, the unit will enter the Pause mode until the button is released.
7. TRACK / DISC SHUFFLE (SFL): When the Shuffle button is pressed, the SHUF indication will appear on the LCD panel and the tracks on the disc will be played in a random, shuffled order. The Track Select function will also select tracks in the shuffled order instead of the normal progression. The Track Shuffle mode can be cancelled by pressing the Shuffle button again, or by activating the Scan or Repeat functions. When the Shuffle button is pressed and held longer than 2 seconds, the SHUF and DISC indications will appear on the LCD panel