Remote Operation for the Code Alarm CA5051
Using Your Remote Control
Using the Keyless Entry: The button is used to lock the vehicle's doors, the button is used to unlock the vehicle's doors. To lock or unlock the doors simply press and release the desired function button one time. For your convenience, the parking lights will flash once when the doors are unlocked and twice when the door are locked.
Two Stage Door Unlock (Optional): If this feature is enabled on your system, pressing the button one time will unlock only the driver’s door. Press again within three seconds to unlock the remaining doors.
Activating the Trunk Release Feature (Optional): The button is used to open the trunk of the vehicle. To open the vehicle's trunk press and hold the button for 3 seconds.
Using the Progressive Car Finder Feature: Press the button to locate your vehicle. The system will sound 5 times at low volume, increasing in volume each time the button is pressed.
Using the Personal Protection Alarm (Panic): Press and hold the button for 3 seconds to activate the personal protection alarm. During panic mode, the normal function of the transmitter buttons will be suspended. The transmitter’s and buttons can be used to lock and unlock the door (if the option is installed). To stop the alarm, press and hold the button on the transmitter again for 3 seconds. The system will automatically stop after 30 seconds.
Programmed Transmitter Notification: As a security precaution each time the vehicle’s ignition is turn on the status LED light with flash the number of transmitters programmed into the system. This helps to identify unauthorized transmitters from accessing your vehicle. If you believe an unauthorized transmitter has been programmed to your system, contact your installing dealer for assistance.
Valet Mode: Valet Mode is used to disable the system from remote starting. To enter or exit valet mode simply follow the 4 steps outlined below:
Eliminating Lock / Unlock Notification Chirps: System lock and unlock notification chirps can be toggled ON or OFF without entering the programming feature banks.
Remote Starting Your Vehicle: To activate the remote vehicle start function, press and release the button 2 times within 2 seconds. The system will sound, the parking lights will flash 1 time and the sys