Troubleshooting the RCA CDS6300 Camera
|
Why do vertical white lines appear when taking pictures of a bright object with the CDS6300? |
- Vertical white lines can appear when there is a lot of contrast between the background and the object in the picture. It is not a defect of the camera. To prevent vertical white lines, try taking the picture from a different angle or adjusting the lighting conditions.
|
Why are the icons and the picture color on the LCD monitor distorted on the CDS6300? |
- The icons and picture color may be distorted if the surface or edge of the LCD monitor is being pressed.
|
Why do colored bright spots appear on the LCD monitor of the CDS6300 ? |
- The LCD monitor is made with high-precision technology. However, black spots or bright spots of light may appear constantly on the LCD monitor. This is not due to any defect of the unit.
|
What do I do if there is no power is supplied to the CDS6300? |
- The batteries are not installed correctly
- The power supply has not been correctly connected
|
What if the power suddenly goes off and does not come back on by itself on the CDS6300? |
- The camera automatically turns off to save power if you don't use the features for
more than a few minutes. Turn the Power dial off and then on again.
- The batteries are completely discharged.
|
What do I do if the rear of the LCD monitor is hot on the CDS6300? |
- The light used to illuminate the LCD monitor causes it to be hot. Turn off the monitor or
set the Power dial to OFF, and let the unit cool down.
|
What if the LCD monitor, the viewfinder, and the lens are dirty on the CDS6300? |
- Wipe them gently with soft a cloth. Gently wipe the LCD monitor in a semicircle because wiping strongly spreads the stain and it won't come out easily
|
What do I do if Although the shutter button is pressed, the picture isn't stored on the CompactFlash card on the CDS6300? |
- When the remaining picture number icon blinks 0, you must delete some pictures before you can store new ones
|
What if it is not possible to shoot in succession on the CDS6300? |
- It takes approximately 2 seconds to store a picture in memory. You'll have to wait until it is stored before taking another picture. If you want to take more pictures in a short\ amount of time, use Burst mode
|
What if All pictures can't be deleted, even if Delete All is selected on the CDS6300? |
- Some pictures may be locked. If they are not necessary, unlock them, then try deleting all the pictures again (see pages 28-29).
- If the pictures cannot be deleted, even after you have unlocked them, you may need to format the CompactFlash card. This will erase all the pictures (including locked)
|
What if there is a problem taking pictures on the CDS6300? |
- Try to delete some of the pictures, then try to take a few more. If that doesn't work, you may need to save any remaining pictures to a computer and format the CompactFlash card. This will clear the card and erase all the pictures (including locked) from memory (see page 34).
|
You can access the User's Manual here
Thank you for your inquiry - Audiovox values our customers and though this product is no longer in production nor does it qualifiy for warranty or repair due to the age of the product, limited support information may be available through our FAQ Database and/or Customer Service.
Before you proceed check this and other answers related to your product by searching with the Model Number of your product from the Search Box above.
NOTE: Technical support, parts, user manuals (not shown on this FAQ), accessories, or repairs are either limited or NOT available for discontinued models.
Comments
0 comments
Article is closed for comments.