Using the Controls on the Jensen NVX225 GPS Navigation System

Using the Controls on the Jensen NVX225 GPS Navigation System

Hardware Buttons 

Hardware buttons are mostly used on map screens to zoom, tilt and rotate the map, or to open other screens. In addition you can use the direction buttons and Enter on list screens to make your selection.

1. Touch Screen - Display the local map. Tap the screen with the stylus to select menu commands or enter information.

Views - Back view

2. Loudspeaker - Playback language statements and warnings.

3. Stylus - Take the Stylus out of its compartment in order to use it, and replace it after use. The Stylus is for operating the touch screen.

Views - Top/Bottom View

4. MENU Button - Press it to return to the Main Menu at any time.

5. Power Button - Press and hold Power button for about two seconds to Wake up the unit.

Left/Right View

6. SD/MMC slot (Service Only) - Accepts an optional SD (Secure Digital) or MMC (Multi Media Card) Card for removable storage.
7. Headphone Interface (3.5mm) - Connects to a pair of stereo headphones.
8. Reset Button - Press it to reset the unit.
9. USB Interface - Interface for connecting to a PC by means of the ActiveSync (USB) Cable (for data updating).
10. External Aerial Interface - Interface for an external aerial antenna.
11. Volume (+ / - ) - Switch Volume+/- to adjust the volume level.
12. Battery On/Off Switch - Switch it to ON/OFF position to turn the power On/Off. Switch OFF for long term storage to conserve battery
13. DC Adaptor Port - Connection to external power supply Vehicle or AC adapter.

Screen Buttons and Controls

Direct selectors
Some of the settings can be chosen from a short list of possible values. If the values can be described graphically, all values are available on the screen, with the currently selected one in a different color.

List selectors
When the values in the list need to be named, only the current value is shown (sometimes together with a short description) in a horizontal stripe with arrows at
both ends.

The arrows are buttons. Tap <- to move left in the list or tap -> to move right. You need not confirm your selection. As soon as you leave the screen, the selected value becomes effective.

Sliders
When a feature has several different unnamed (numeric) values, The NVX225 Navigator will show sliders that look like analogue potentiometers to set the desired
value. If the value limits are not