Using the Controls on the Jensen NVX200 GPS Navigation System

Hardware Buttons

Hardware buttons are mostly used on map screens to zoom, tilt and rotate the map,
or to open other screens. In addition you can use the direction buttons and Enter on
list screens to make your selection. 

1.Touch Screen Display the output of your appliance. Tap the screen with the stylus to select menu commands or enter information.

2. Battery Charge Indicator When the battery is charging the Indicator is red, When the battery is fully charged, the Indicator will turn to green.

Views - Back view

3.Stylus Take the pen out of its compartment in order to use it, and replace it after use. The pointer pen is required for operating the touch screen.

4.Loudspeaker Plays back language statements and warnings.

5. Reset button Press it to reset the unit.

6. External aerial interface  - This is a Interface for an optional second aerial.

Views - Top/Bottom View

7. Sleep/Wake up Button Press and hold Sleep/Wake up button for about two seconds to Wake up the unit.

8. USB Interface - This Interface is for connecting to a PC by means of the ActiveSync Cable (for data matching).

Left/Right View

9. SD/MMC Slot Accepts an optional SD (Secure Digital) or MMC (Multi Media Card) Card for removable storage.

10. Headphone Connects to a pair of stereo headphones.

11. Power Port Connection to external power supply.

GPS Tips

GPS is a satellite-backed system for determining your position. With the help of 24 satellites revolving around the earth, it is possible to determine your position on earth with the accuracy of a few meters. The satellite signals are received by the antenna of the built-in GPS receiver, which must have a “line of sight” to at least 4 of these.

Note: By limited line of sight (e.g. in tunnels, between houses, in woods or also in vehicles with metal-coated windows) it is not possible to determine the position.
The satellite reception however automatically picks up again as soon as the obstacle has been passed and there line of sight is reestablished again.

• Please note that your appliance is preset to not shut down automatically after a few minutes without activity. You can Change this preset in the Settings mode.
• If the GPS receiver has not been active for some hours, it must orientate itself again. This process may take a while.

Memory Card Quick Installation
This option is only available to you if your navigation system is equipped with a prepared memory card. In this case, you will ready