Connecting the RCA eMusic1 Digital MP3 Player to Computer

Connecting the RCA eMusic1 MP3 Digital Player to a Computer

Computer System Requirements:

1. Operating System:	Microsoft Windows 98 SE, Windows Me, Windows 2000, Windows XP
2. CPU:	Intel Pentium 3, Intel Pentium 4, or compatible
3. Memory:	above 64 MB
4. Hard Disk Space:	200MB or above
5. Interface:	full-speed USB
6. CD-ROM

Connect with Computer:

1. Connect the player to the computer with the USB cable provided or directly connect.
   
    

Installation of the Communication Software:

• No additional driver software is required for Windows 2000/Me/XP after connecting the player to the computer via USB. It will be recognized automatically as a "Removable drive".
• For Windows 98 SE, please install the driver software from the CD-ROM provided.

Disconnect from Computer:

For Windows 2000, from the System Tray, double-click the icon to select Safely Remove Hardware. Select the drive corresponding to your player and click Stop. The Stop a Hardware device screen appears. Select the device to be stopped again for confirmation and click OK.

You can also stop your player by left click on the icon from the System Tray and selecting the drive corresponding to your player. Before disconnecting the USB connection from the computer or the Digital Audio Player, be sure the "Safe to Remove Hardware" message is displayed.

Note: Do not unplug the player from the computer's USB port until Windows prompts that it is safe to do so. Otherwise, data loss or even physical damage to the player may occur. Our company will not be responsible for any damage/loss cause by inappropriate operation.

Note: The description on this page is based on Windows 2000. If you are running other operating systems, there may be some differences. See the Windows help for details about safely removing hardware.

For more information, please refer to your Owner's Manual.