Installing the Audiovox ROSIBC Interior Camera

Installing the Audiovox ROSIBC Interior Camera  

WARNING: If you want to adjust the camera to viewing area, please adjust the camera up or down, left or right following the moving direction sign marked on the camera shell.
Do not rotate the camera!

Installation 1: Suction cup

1. Locate and clean suitable mounting location on glass near baby seat side of vehicle.
2. Attach the camera suction cup to the selected mounting location.
3. Connect the camera cable to the extension cable provided with the rear view mirror.
4. Route the camera cable up to and under the headliner of the vehicle.
5. Route the extension cable up to the rearview mirror control box and plug in the 4-pin connector.

Installation 2: Headliner pins

1. Remove the suction cup by rotating counter clockwise.
2. Locate suitable mounting location on headliner of vehicle.
3. Insert the mounting pin along opposite sides of camera into the headliner. Push the mounting pins into the headlines until pin hooks are at mounting tab. Place the pin hooks of mounting pin on mounting tabs.
4. Connect the camera cable to the extension cable provided with the rear view mirror.
5. Route the camera cable under the headliner of the vehicle.
6. Route the extension cable up to the rearview mirror control box
   and plug in the 4-pin connector.

Installation 3: Double sided adhesive tape.

1. Remove the suction cup by rotating counters clockwise.
2. Locate suitable flat mounting location in vehicle that double-sided tape will adhere to.
3. Remove one side of the protective paper of both pieces of adhesive tape and adhere tape to back of camera.
4. Remove remaining protective paper and adhere the camera to the selected mounting location.
5. Connect the camera cable to the extension cable provided with the rear view mirror.
6. Route the camera cable up to and under the headliner or side panel of the vehicle.
7. Route the extension cable up to the rearview mirror control box and plug in the 4-pin connector.