|
Operating Instructions for Prestige APS687 / APS687A Remote Start System |
|
| Keyless Entry Operation: |
To lock the vehicle:
To unlock the vehicle:
Note: Holding the lock/unlock button for 3 seconds will activate the car finder mode causing the parking lights to flash for 30 seconds or until the button is activated again for 3 seconds or any other button is operated. |
|
Additional Remote Function (Channel 3): |
This system has an additional feature that can be connected to a number of different optional accessories. Some of the more common uses for this channel are:
To activate the optional accessory, press and hold the trunk/key button on the transmitter for 4 seconds. |
| Additional Remote Function (Channel 4): |
This system has an additional feature that can be connected to a number of different optional accessories. Some of the more common uses for this channel are:
To activate the optional accessory, press the option button on the transmitter. The optional accessory will immediately engage. |
| Additional Remote Function (Channel 5): |
This system has an additional feature that can be connected to a number of different optional accessories. Some of the more common uses for this channel are:
To activate the optional accessory, press the option button on the transmitter. The optional accessory will immediately engage. |
| Additional Remote Function (Channel 6): |
This system has an additional feature that can be connected to a number of different optional accessories. Some of the more common uses for this channel are:
To activate the optional accessory, press the option button on the transmitter. The optional accessory will immediately engage. |
| Additional Remote Function (Channel 7): |
This system has an additional feature that can be connected to a number of different optional accessories. Some of the more common uses for this channel are:
To activate the optional accessory, press the option button on the transmitter. The optional accessory will immediately engage. |
| PRLED Safety Control Switch: |
The control switch allows you to temporarily disable the remote starting function of the system. To place the system in the service mode:
|
Comments
0 comments
Article is closed for comments.