Articles in this section

See more

Operating Instructions for APS675 Remote Start System

Avatar
CS
Updated
Follow

Operating Instructions for Prestige APS675 Remote Start System
Keyless Entry Operation:

To lock or unlock the doors:

  1. Simply press and release button 1 on the transmitter. 

Additional Remote Function (Channel 2):

This system has an additional feature that can be connected to a number of different optional accessories. Some of the more common uses for this channel are:

  • Remote Trunk Release
  • Remote Windows Closure
  • Remote Garage Door Interface

To activate the optional accessory, press and hold button 2 on the transmitter for 4 seconds.
Additional Remote Function (Channel 3):

This system has an additional feature that can be connected to a number of different optional accessories. Some of the more common uses for this channel are:

  • Remote Trunk Release
  • Remote Windows Closure
  • Remote Garage Door Interface

To activate the optional accessory, press button 3 on the transmitter. The optional accessory will immediately engage.
Safety (Red Handled) Control Switch:

The control switch allows you to temporarily disable the remote starting function of the system.

To disable the unit:

  1. Move the control switch to the off position.

The control switch also allows you to select between 2 and 4 hour start up when using the automatic start up timer mode. The factory preset start up time for this mode is every 4 hours.

To select between 2 or 4 hour start up timer:

  1. Begin with the control switch in the on position.
  2. Turn the ignition switch on then off.
  3. Within 10 seconds, move the control switch off, on, off, on to select a 2 hour start timer. Or, within 10 seconds, move the control switch off, on, off, on, off, on, off, on to select a 4 hour start timer.
Remote Starting the Vehicle:

This unit will not start if any one of the following situations exists:

  • The vehicle's hood lid is opened.
  • The gear shift selector is not in Park.
  • The brake pedal is depressed.
  • The system is placed in the override position.

To start the vehicle:

  1. Press and release channel 2 on the transmitter two times within 2 seconds. The vehicle will start and remain running for the pre-programmed 10 or 15 minutes. As a visual indication, the parking lights will flash or remain on depending on the setting by your installation center.
  2. When you arrive at the vehicle, unlock it with the key or by pressing and releasing button 1 on your transmitter. Enter the vehicle and turn the ignition key to the on position (not the start position).
  3. Step on the brake pedal to disengage the remote starter. The vehicle will continue to run, but now on its own power.
Operating on Automatic Start Up Timer Mode:

Your system has the ability to automatically start the vehicle every 2 or 4 hours over a 48 hour period.

To being the timer:

  1. Turn the ignition key on then off.
  2. Within 10 seconds, activate the RF start command two times (push the second channel button of your transmitter 4 times). The parking lights will flash indicating the timed start mode is activated.
  3. The vehicle on a 2 or 4 hour interval basis, will automatically start, run for the pre-programmed time (10 or 15 minutes) and then shut off. This will continue for 48 hours.

To start the timer using only the transmitter:

    <li

Comments

0 comments

Article is closed for comments.