Articles in this section

See more

Operating Instructions for APS650RS Remote Start System

Avatar
CS
Updated
Follow

Operating Instructions for Prestige APS650RS Remote Start System
Keyless Entry Operation:

Button 1 on the transmitter is used to lock and unlock the vehicle's doors. 

  1. Simply press and release button 1 on the transmitter. As a keyless entry unit, when the doors are locked, the parking lights will flash once. When the doors are unlocked the parking lights will flash twice.
Remote Starting the Vehicle:

This unit will not start if any one of the following situations exists:

  • The vehicle's hood lid is opened.
  • The gear shift selector is not in Park.
  • The brake pedal is depressed.
  • The system is placed in the override position.

To start the vehicle:

  1. Press and release button 2 two times within 2 seconds. The vehicle will start and remain running for the pre-programmed 10 or 15 minute run cycle. As a visual indication, the parking lights will flash or remain on depending on the setting by your installation center.
  2. When you arrive at the vehicle, turn the ignition key to the on position (not the start position).
  3. Step on the brake pedal to disengage the remote starter. The vehicle will continue to run, but now on its own power.
Safety Control / Switch:

The control switch allows you to temporarily disable the remote starting function of the system. This is recommended whenever the vehicle is being serviced. When the system is disabled, the remote door locks and optional accessories will remain operational.
Additional Remote Function (Channel 2):

This system has an additional feature that can be connected to a number of different optional accessories. Some of the more common uses for this channel are:

  • Remote Trunk Release
  • Remote Window Closure
  • Remote Garage Door Interface

To activate the optional accessory, press and hold button 2 on the keychain transmitter for 4 seconds.
Additional Remote Function (Channel 3):

This system has an additional feature that can be connected to a number of different optional accessories. Some of the more common uses for this channel are:

  • Remote Trunk Release
  • Remote Window Closure
  • Remote Garage Door Interface

To activate the optional accessory, press button 3 on the keychain transmitter. The optional accessory will immediately engage.


For more detailed operating instructions, please refer to your Owner's Manual.

 

Comments

0 comments

Article is closed for comments.