Troubleshooting the AA9300 Remote Alarm System

Troubleshooting the AA9300 Remote Alarm System
Problem	Solution
Why doesn't the siren for the AA9300 chirp when the harness is first plugged in?	Verify that the fuse in the red wire from the siren control module is in good condition. Replace it if it is blown. Verify that the connections of the red and black wires have been made according the wiring section of the manual.
Why won't the AA9300 transmitter program to the siren control module?	You have only 15 seconds after applying power to the siren control module in which to program both transmitters.
Why won't the alarm arm and disarm using the AA9300 keychain transmitter?	Verify that the transmitter battery is in good condition. Try both transmitters. Replace the transmitter battery if necessary. Verify that the transmitter is programmed to the siren control module. When the vehicle's battery is disconnected, or when power is removed from the siren control module, the transmitters need to be reprogrammed. Verify that the fuse in the red wire from the siren control module is in good condition. Replace it if it is blown. Verify that the connections of the red and black wires have been made according to the wiring detail of the manual.