Troubleshooting the Audiovox HR7008PKG
|
Why do I do when the IR Sensor is inoperative on the Audiovox HR7008PKG? |
- Verify that the batteries in the remote are fresh
- Verify that the remote sensor eye is not obstructed
- Verify that Master Monitor or Satellite Monitor has been selected correctly.
|
Why won't the disc play on the Audiovox HR7008PKG? |
- Check the type of disc you put into disc tray. This player only plays DVDs, audio CDs and MP3s
- If you have verified you are attempting to play a supported disc type from the above and still have a problem - see the Need Help Section Below to contact customer support.
|
Why does play start, but then stop immediately on the Audiovox HR7008PKG? |
- The disk is dirty, clean it.
- Condensation has formed in the player. Allow the player to dry out.
|
Why is the sound distorted or why is there no sound on the Audiovox HR7008PKG? |
- Make sure your player is connected properly. make sure all cables are securely inserted into the appropriate jacks.
- The disc may be loaded backwards- turn the disc around so that the disc label is facing towards the driver.
|
Why does the OSD display incorrect disk format on the Audiovox HR7008PKG? |
- The disc may be loaded backwards- turn the disc around so that the disc label is facing towards the driver.
|
You can also access the User's Manual here.
Comments
0 comments
Article is closed for comments.