Installing Terk TV5 Indoor Television Antenna

Installation of Terk TV5 Indoor Amplified Antenna

Assembly:

1. Simply insert the receiving elements into the center control arm and hand-screw the center cap, making sure you have a snug fit.
   See Fig.1. 

Connecting your Antenna:

There are two ways to connect your antenna. This will depend on your model of television.

For Televisions with One 75 Ohm Input for VHF and UHF:

1. Connect the coaxial cable from your antenna to the "F" connector input marked VHF/UHF on your TV.
   See Fig.2.

For Televisions with Separate 75 Ohm VHF and UHF Inputs:

1. Attach the band separator (not included) to the coaxial cable attached to the back of your antenna.
2. Screw in the VHF connector from the band separator to the VHF input on your TV or VCR.
3. Attach the 300 ohm twin wire from the band separator to the two screws marked UHF.
   See Fig.3.

Powering your Antenna:

1. Attach the AC adapter (included) to the DC input on the rear of your antenna.
2. Plug the other end of the adapter into any 12 volt AC outlet.

Find the best location for the Antenna:

Your antenna is a precision instrument and should be placed in a location that is best for receiving TV signals. It can be placed on top of any standard TV for ease of adjustment.