Setup Information for VE1020 DVD Player and TV
|How do I setup my VE1020 System?||
Initial Setup: This unit defaults to cable TV mode. When the unit is first powered on it will detect the cable system and auto-program the TV tuner to the available stations. During this time the unit will not respond to any button at all. The unit will respond normally once the cable mode and channel search mode is concluded.
Channel Tuning Setup: When set to broadcast TV, it receives CH2-CH69. When set to one of the CATV modes (STD, HRC or IRC) it receives CH1-CH125. After a power interruption, the unit will go into a cable mode search and channel search mode automatically.
Setting the Time: (NOTE: The VE1020 must be turned Off to perform this task.)
Setting and Activating the Alarm: (NOTE: The VE1020 must be turned Off to perform this task.)
Deactivating the Alarm: (NOTE: The VE1020 must be turned Off to perform this task.)
(NOTE: The set times will be stored in memory and can be reactivated whenever desired by performing steps 1-3 of the Deactivating Alarm procedure above.)
Setting the Alarm Tones: (NOTE: Alarm must be in the "Activated" mode and volume turned up to hear tones.)
Press SETUP to display the Main Menu. To navigate in this menu, use the Up/Down button to move the cursor to the desired option then press Enter to display the submenu. Use the Right button to enter the option item menu. Then use the Up/Down buttons to select the desired setting and then press ENTER to confirm the selection. Press the Left button to return. Press SETUP again to exit th