Setup Information for AVD400TA DVD Player
|How do I setup my AVD400TA DVD Player?
Press STOP and then press SETUP to display the Main screen of the Setup Menu. Press SETUP again to exit the SETUP Menu and the unit will resume its last playback mode.
- Language: You can choose languages for OSD, Subtitle, Audio and DVD Menu.
- Video: You can choose TV Shape and TV System.
- TV Shape: You can choose 4:3/PS, 4:3/LB or Wide.
- 4:3/PS: When the player is connected to a normal TV and a wide picture is shown on the full screen.
- 4:3/LB: When the player is connected to a normal TV, and a wide picture is shown on the screen with a black strip at both the top and bottom of the screen.
- 16:9: When the player is connected to a wide screen TV, a wide picture is shown on the full screen.
- TV System: You can choose NTSC, PAL or Auto.
- Audio: You can select Digital Out or Lpcm 48k DS.
- Rating: You can select Password, Rating and Restore Default.
- Password: For first time use the default password is 3308 to unlock the unit. This password is always effective even after you have selected your own password and changed it.
- Rating: You can select a rating level from 1 Kid Safe to 8 Adult by pressing the ENTER button repeatedly to toggle through the different levels. After selecting a rating level, return to the password menu and input either the default password or any new 4-digit password and press ENTER.
- Restore Default: Restores all of the options to the default settings. This does not affect the parental rating control settings.
|How do I connect the power to my AVD400TA DVD Player?
- Connect the black wire (-) to the vehicle ground.
- Connect the red wire (+) to a switched (Accessory) 12VDC source.
- Plug the other end into the 12VDC input jack on the rear of the unit.
|How do I connect the IR remote receiver to my AVD400TA DVD Player?
||Plug the 1/8” jack on the remote IR cable into the IR IN jack on the rear of the unit. Place the IR receiver anywhere in the vehicle to allow remote control from any location.
|How do I connect my AVD400TA DVD Player to a monitor?
- Match the color-coded plugs to the appropriate jacks on the back of the DVD Player A/V OUTPUT jacks: Yellow (video) to Yellow, White (left audio) to White, and Red (right audio) to Red.
|How do I connect my AVD400TA DVD Player to an external video source, such as a video game or other audio/video source?
- Plug the A/V output jacks of the source into the matching color-coded A/V input jacks on the front or rear of the DVD player.
- Press the DVD/TV/AUX button on the remote until AUX is displayed on the monitor.
|How do I connect my AVD400TA DVD Player to a TV Antenna?
||Connect an optional TV antenna to the TV ANTENNA Jack on the rear of the DVD Player.