Valet switch use and purpose on your car security system

The valet switch allows you to temporarily bypass all alarm functions, eliminating the need to hand your transmitter to parking attendants or garage mechanics. When the system is in valet mode, all alarm functions are bypassed, however the remote panic feature and remote door locks will remain operational. To use the valet mode, the system must first be disarmed either by using your key chain transmitter, or by activating your personalized manual override code. 

1. Enter the vehicle and turn the ignition key to the on position. 
2. Press and hold the valet pushbutton switch or turn the valet switch to the off position. The system will remain in the valet mode.
3. To return to normal operation make sure the ignition is in the on position, press and release the pushbutton switch or turn the valet switch to the on position.

NOTE: Always remember to exit the valet mode. This will ensure that the vehicle remains protected at all times.